Commercial Vinyl Flooring: Specify It for the Second Life, Not Just the First
Commercial flooring decisions are usually made on first-life criteria: wear, slip resistance, hygiene, acoustic performance, maintenance and budget. End-of-life is somewhere near the bottom of the specification, if it appears at all. Yet the choices made at specification stage decide whether the floor can be taken back, separated and recycled when the building is refurbished, or whether it becomes another mixed load in a skip.
Vinyl is a good material to test this on. It is durable, cleanable and widely used in schools, hospitals, offices, shops and transport buildings. It is also thermoplastic, which means it can, in principle, be reprocessed. The gap between “can be” and “is” is mostly a specification and logistics problem.
What “commercial vinyl” actually covers
Commercial vinyl is not one product. Sheet vinyl, vinyl tile and luxury vinyl tile or plank differ in construction, backing, wear layer and installation method. Homogeneous products are PVC through the thickness; heterogeneous products combine a PVC wear layer with a printed design layer, a core and a backing. The backing may be foam, felt, textile or a PVC layer. Each of those choices changes how the floor performs, how it is installed and how easily it can be recovered.
The use class matters too. A product rated for light domestic traffic is not a substitute for a heavy commercial grade, and a floor that fails early has a worse environmental profile than one that lasts. The first circular principle is still durability: the longest-lived floor is the one that does not need to be replaced.
The end-of-life problem
Post-installation offcuts are the easy part. They are clean, dry and known. Uplifted flooring is harder. It arrives with adhesive residue, screed dust, underlay, staples, dirt and sometimes a mixture of products from different areas of a building. That contamination reduces the value of the PVC and increases the cost of processing.
Mixed constructions are the other problem. A PVC wear layer bonded to a felt backing, a cushioned foam layer or a jute carrier is not a single material stream. Separating those layers is difficult, and many take-back schemes will not accept them. The same applies to adhesive that is incompatible with the recycling process or to floors that have been patched with different products over the years.
What recyclers can actually take
In the UK, the best-established route is Recofloor, the vinyl take-back scheme founded by Altro and Polyflor in 2009. It collects LVT, smooth, safety and loose-lay vinyl offcuts, roll ends and uplifted smooth or loose-lay vinyl from commercial projects. It does not accept cushioned flooring, jute or fabric-backed products, laminate, carpet or linoleum. Material needs to be clean and presented in the way the scheme requires.
Manufacturer programmes add another route. Tarkett ReStart and Forbo’s flooring take-back schemes collect suitable offcuts and, in some cases, uplifted material. The common thread is that the material has to be identifiable, separable and free of contaminants that would compromise the recyclate. A take-back promise is only useful if the floor on the slab matches the one in the brochure.
Specify for separation
The most effective circular specification is boring: keep the floor as close to a single material as possible, and plan the uplift before the first tile is laid. In practice, that means:
- Choose a PVC-rich construction. Homogeneous or PVC-backed products are easier to recover than composites with felt, foam or textile carriers.
- Check the adhesive. Use an adhesive that the take-back scheme or recycler accepts, and follow the coverage and open-time instructions. Adhesive residue is a contaminant, not a minor detail.
- Keep the product identifiable. Record the manufacturer, product name, construction and installation date. A future contractor should not have to guess what is under the carpet.
- Plan the uplift. Write take-back into the tender, require a statement letter or collection confirmation, and separate vinyl from other demolition waste on site.
- Use the standards. Homogeneous PVC flooring is covered by BS EN ISO 10581; CE marking and use classes sit around BS EN 14041 and BS EN ISO 10874. Recycled-content claims should follow BS EN ISO 14021, and environmental product declarations give a consistent way to compare products.
None of that guarantees recycling. It removes the predictable reasons why a load gets rejected.
The legacy plasticiser question
Old PVC flooring can contain legacy plasticisers such as DEHP, DBP, BBP or DIBP. Those substances are restricted under REACH, and recycled material containing them above the relevant threshold cannot simply be placed on the market in new applications. That is the problem the Circular Flooring project was set up to address: the CreaSolv® process separates PVC from legacy plasticisers, and the extracted plasticiser fraction is converted into REACH-compliant substances.
For a specifier, the practical lesson is to keep old and new streams separate. Do not mix uplifted legacy flooring with clean installation offcuts if the recycler needs a known composition. Ask for the material content, and do not assume that “PVC” on the invoice tells you whether the plasticiser package is compliant. The circular economy case depends on safe material, not just more material.
The procurement checklist
Before the order goes out, the specification should be able to answer these questions:
- What is the full construction, including backing and wear layer?
- Which take-back scheme accepts this exact product, and in what condition?
- Which adhesive is compatible with that route?
- How will uplifted material be separated from carpet, laminate, screed and general waste?
- Who will provide the collection evidence and waste transfer documentation?
- What recycled content is claimed, and is it verified to BS EN ISO 14021?
- Is there an environmental product declaration for the product?
- What is the plan for the floor at the end of the lease or refurbishment?
A floor that cannot answer those questions may still perform well. It is just less likely to come back.
The business case
The commercial case is not only environmental. A coordinated take-back can reduce skip costs, produce evidence for sustainability reporting and reduce the risk of a future refurbishment being held up by waste classification. It also future-proofs the building against tighter recycled-content and extended producer responsibility rules. The exact savings depend on the project, the scheme and the distance to the processor, so they should be modelled rather than assumed.
Commercial vinyl flooring is a long-life product. The best time to decide what happens to it is before it is installed. Specify the second life, and the first life gets easier too.